BJWZH - USG-TOPPING II
- MSDS: BJWZH
- Manufacturer: UNITED STATES GYPSUM COMPANY
- Product Name: USG-TOPPING II
- National Stock Number: 5640-00F012513
Product Identification
Product ID:USG-TOPPING II
MSDS Date:09/03/1992
FSC:5640
NIIN:00F012513
MSDS Number: BJWZH
Responsible Party
CHICAGO, IL 60606-4678
US
Emergency Phone: 312-606-4542
Info Phone: 312-606-4542
Cage: 61357
Contractor
Telephone: 312-606-4000 (EMERG /4542)
Cage: 61357
Ingredients
CALCIUM CARBONATE, DOMOLITE, LIMESTONE, WHITING
CAS: 1317-65-3
RTECS: EV9580000
OSHA PEL 15 MG/CUM (DUST)
ACGIH TLV: 10 MG/CUM (DUST)
WATER
CAS: 7732-18-5
RTECS: ZC0110000
SILICA, MICA, MUSCOVITE
CAS: 12001-26-2
RTECS: VV8760000
OSHA PEL 20 MPPCF
ACGIH TLV: 3 MG/M3 RDUST; 9293
TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM
CAS: 14807-96-6
RTECS: WW2710000
OSHA PEL 20 MPPCF
ACGIH TLV: 2 MG/CUM (RESP DUST)
PERLITE
CAS: 93763-70-3
RTECS: SD5254000
OSHA PEL 5 MG/CUM (DUST)
ACGIH TLV: 10 MG/CUM TOTAL DUST
POLYVINYL ACETATE, VINYL ACETATE POLYMER
CAS: 9003-20-7
RTECS: AK0920000
ETHYLENE GLYCOL, GLYCOL
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: 0-1%
ACGIH TLV: C 127 MG/CUM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
GYPSUM
CAS: 13397-24-5
RTECS: MG2360000
OSHA PEL 15 MG/CUM TOTAL DUST
ACGIH TLV: 10 MG/CUM
<20 G/L
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NOSE, THROAT & UPPER
RESPIRATORY SYSTEM IRRITATION. EYES: TRANSITORY IRRITATION. SKIN:
DRYNESS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: LUNG DAMAGE (PULMONARY FIBROSIS).
Medical Cond Aggravated by Exposure:UPPER RESPIRATORY & LUNG DISEASE,
BRONCHITIS, EMPHYSEMA, & ASTHMA
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER TO REMOVE PARTICLES. SKIN: WASH
THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR.
INGESTION: OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Extinguishing Media:NOT COMBUSTIBLE
Accidental Release
Spill Release Procedures:SCOOP UP. WASH DOWN AREA BEFORE MATERIAL
DRIES.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY PLACE. AVOID
FREEZING.
Other Precautions:WHEN FINISHING JOINTS USING THESE PRODUCTS, WET
SANDING IS RECOMMENDED.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVE DUST RESPIRATOR IF DRY SANDED
Ventilation:GENERAL MECHANICAL OR LOCAL EXHAUST
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
HEALTH EFFECTS ARE DERIVED FROM SPRAY MIST OR DUST FROM DRY SANDING.
PRODUCT MAY CONTAIN INGREDIENTS 1317-65-3 OR 13397-24-5.
Chemical Properties
Spec Gravity:1.6
pH:8-9.5
Appearance and Odor:OFF WHITE PASTE W/LOW ODOR
Percent Volatiles by Volume: 35
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FREEZING
Disposal
Waste Disposal Methods:SANITARY LANDFILL IN ACCORDANCE W/FEDERAL,
STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.